|
Option
Name |
Price |
|
350 4340 steel crankshaft |
add $595.00 |
|
383 4130 steel crankshaft |
add $500.00 |
|
383 4340 steel crankshaft |
add $595.00 |
|
84 up Corvette engines require 7" balancers on 383 |
add $235.00 |
|
Accel 8.8 mm Spiral Core wires MFY wire looms Access plugs - custom made |
add $125.00 |
|
Accel 8mm spiral coil wires MFY wire looms, spark plugs - custom made |
add $115.00 |
|
Accel Hi-Output coil |
add $33.00 |
|
Air Cleaner 14" low profile |
add $32.90 |
|
Air Cleaner K&N 14" X 3" |
add $78.00 |
|
Air Cleaner K&N 14" X 4" |
add $98.00 |
|
Air Cleaner K&N 14" X 5" |
add $110.00 |
|
Air Cleaner polished aluminum oval |
add $125.00 |
|
Aluminum block |
Request Price |
|
Aluminum block, std. deck height |
add $3750.00 |
|
ARP stainless steel engine bold kit -smallblock - Chevy |
add $125.00 |
|
ARP stainless steel head bold kits |
add $130.00 |
|
ASE 4340 lt. wt. H beam steel rods- 3 times stronger than stock |
add $495.00 |
|
ASE. 4340 billet steel I beam rods w/ARP 2000 bolts |
add $895.00 |
|
ATI SFI approved dampner for 355 |
add $295.00 |
|
ATI SFI approved dampner for 355 |
add $295.00 |
|
ATI SFI approved dampner for 383 |
add $325.00 |
|
Black powder coated logo alum. valve covers, tall |
add $245.00 |
|
Carbon fiber dist. gear for steel billet roller cams |
add $120.00 |
|
Chevy Bow Tie pent roof valve covers,tall, machined for breathers |
add $335.00 |
|
Chevy II rear sump 6 qt. oil pan & pick up, 8 1/2" deep |
add $345.00 |
|
Chevy orange powder coated alum. valve covers, tall |
add $245.00 |
|
Chrome thermostat housing and thermostat - std 55-82 |
add $ 18.00 |
|
Chromed aluminum intake manifolds, valve covers |
Request Price |
|
Comp Cams roller tip rockers |
add $175.00 |
|
Competition Cams Pro Magnum roller rockers arms - strongest |
add $280.00 |
|
Competition Cams roller tip rocker arms 87-96 self aligning |
add $180.00 |
|
Crane aluminum roller rocker arms |
add $220.00 |
|
Crane roller tip rocker arms |
add $110.00 |
|
Crating and Handling - 48 States |
add $105.00 |
|
Custom braided stainless steel fuel line from, carb to pump |
add $125.00 |
|
Dart M engine block |
add $1,750.00 |
|
Dart SHP engine block |
add $1,395.00 |
|
Dip stick Chrome |
add $10.00 |
|
Dip stick right hand |
add $18.00 |
|
Eagle 5140 steel lt wt I beam rods |
add $295.00 |
|
Eagle 5140 steel lt. wt. I beam rods |
add $295.00 |
|
Edelbrock 2x4 manifold, carbs and linkage, dyno tuned |
add $1,195.00 |
|
Edelbrock 750 cfm Performer carb w/electric choke, dyno tuned |
add $355.00 |
|
Edelbrock hi-volume aluminum water pump |
add $185.00 |
|
Edelbrock hi-volume aluminum water pump reverse flow |
add $189.00 |
|
Edelbrock hi-volume mechanical fuel pump |
add $95.00 |
|
Edelbrock hi-volume polished aluminum water pump |
add $275.00 |
|
Edelbrock polished aluminum timing cover |
add $70.00 |
|
Edelbrock RPM "Air Gap" manifold -425 hp & up |
add $85.00 |
|
Elgin roller tip rocker arms |
add $145.00 |
|
Fluid dampnr, SFI approved |
add $375.00 |
|
Flywheel - 350 stick shift, cast iron |
add $150.00 |
|
Flywheel steel - stick shift 350, 355" engines 153T, 168T |
add $255.00 |
|
Flywheel steel - stick shift 383, 406" engines 168T |
add $265.00 |
|
Fuel Line - Billet alum. and braided stainless steel - Holley carb only |
add $70.00 |
|
Fuel line - custom braided stainless steel - from carb to pump |
add $125.00 |
|
Fuel pump Carter mechanical - standard, most applications |
add $26.00 |
|
Harland Sharp roller rocker arms |
add $275.00 |
|
HD automatic flexplate, SFI approval |
add $65.00 |
|
HD automatic flexplate, small dia. 153T, SFI approved for 383 |
add $130.00 |
|
HD water pump - cast iron |
add $69.00 |
|
HD water pump - cast iron, reverse flow |
add $69.00 |
|
Heavy Duty Clutches |
Request Price |
|
Hi-Tork chrome light weight mini starter - 2.3 hp |
add $245.00 |
|
Hi-Tork L-88 starter |
add $125.00 |
|
Hi-Tork light weight mini starter - 3.0 hp |
add $225.00 |
|
Hi-Tork light weight mini starter- 2.3 hp |
add $185.00 |
|
Holley 650 cfm "Premium Series" double pump Dyno Tuned carburetor |
add $420.00 |
|
Holley 670 Avenger carburetor, vac., sec., Dyno Tuned |
add $395.00 |
|
Holley 700 cfm "Premium Series" double pump Dyno Tuned carburetor |
add $460.00 |
|
Holley 750 hp carb |
add $675.00 |
|
Holley 770 Avenger carburetor, vac., sec., Dyno Tuned |
add $420.00 |
|
Holley electric choke kit - installed |
add $60.00 |
|
Holley hi-volume mechanical fuel pump |
add $75.00 |
|
Holly 600 cfm RV carb. vac. sec. elec. choke, Dyno Tuned |
add $296.00 |
|
Holly 750 cfm "Premium Series" double pump Dyno Tuned carburetor |
add $ 485.00 |
|
Holly 800 cfm "Premium Series" double pump Dyno Tuned carburetor |
add $514.00 |
|
Hydraulic roller cam & kit (must be used with roller rocker arms) |
add $915.00 |
|
Jesel rocker shaft, 480 hp up - requires additional machine work |
add $900.00 |
|
Mallory billet distributor- recurved, one piece |
add $275.00 |
|
Mallory digital ignition w/rev limiter |
add $225.00 |
|
Mallory dual point distributor - recurved for your engine |
add $155.00 |
|
Mallory electronic coil |
add $ 46.00 |
|
Mallory HEI electronic distributor w/Hi-Intensity coil, curved for your engine |
add $200.00 |
|
Mellanized distributor gear for roller cams |
add $49.00 |
|
MSD 6 AL ignition w/rev limiter |
add $236.00 |
|
MSD 8.5mm spiral coil wires MFY wire looms, spark plugs - custom made |
add $132.00 |
|
MSD billet aluminum electronic Corvette tech drive distributor, small cap - curved for your engine (Requires MSD 6AL |
add $350.00 |
|
MSD billet GM HEI distributor - recurved for your engine |
add $385.00 |
|
MSD electronic coil |
add $48.00 |
|
MSD small cap race distributor - curved for your engine, requires 6A ignition |
add $245.00 |
|
Oil Pans - Custom hi-capacity 7 and 8 qt. road race oil pans - low profile |
add $385.00 |
|
PBM steel dampner, SFI approved 355, 396, 427, 434 |
add $235.00 |
|
PBM steel dampner, SFI approved 383 |
add $250.00 |
|
Polished aluminum heads and intake manifold |
Request Price |
|
Polished billet aluminum breathers and/or PVC |
add $66.00 |
|
Polished billet aluminum thermostat hoursing and thermostat |
add $44.00 |
|
Power steering - w/ brackets -most applications |
add $275.00 |
|
Powermaster 120 amp alternator w/brackets |
add $235.00 |
|
Powermaster 90 amp alternator w/brackets |
add $215.00 |
|
Powermaster chrome 80 amp 1 wire alternator w/brackets |
add $255.00 |
|
Pro Race custom carburetors, World Fastest Carburetors |
Request Price |
|
Pro Race steel dampner, SFI approved, 383 |
add $235.00 |
|
Pulleys - 3 groove crankshaft pulley for short water pump applications, polished alum. |
add $50.00 |
|
Pulleys - Custom billet aluminum pulleys - 3 pc. Set (for polished pulleys add $50) |
add $155.00 |
|
Pulleys - March 3 pc. Reduction pulley set, polished, prices vary for applications |
Request Price |
|
RPM aluminum roller rocker arms- street-strip |
add $200.00 |
|
Solid roller cam & kit - custom designed (must be used with roller rockers) |
add $795.00 |
|
Turn key Engine Option 56-82 Corvette w/aluminum water pump |
add $2,495.00 |
|
Turn key Engine Option 56-82 Corvette w/iron water pump |
add $2,395.00 |
|
Turn key Engine Option thru 1985 w/aluminum water pump |
add $2250.00 |
|
Turn key Engine Option thru 1985 w/iron water pump. |
add $1,995.00 |
|
Turn Key Engine Option: 1986 up new generation engines and 1984 up Corvettes require special single belt pulleys and brackets, includes steering and air cond comp. (prices may vary) |
add $2,950.00 |
|
Valve covers - American Speed logo, polished aluminum |
add $175.00 |
|
Valve covers - B&B polished aluminum w/baffles, tall or short |
add $110.00 |
|
Valve covers black powder coated logo alum. tall |
add $245.00 |
|
Valve covers Chevy Bow Tie pent roof w/American Speed logo, machined for breather |
add $365.00 |
|
Valve covers Chevy Bow Tie pent roof machined for breather |
add $330.00 |
|
Valve covers Chevy logo black crinkle finish tall |
add $175.00 |
|
Valve covers Chevy orange powder coated alum.tall |
add $245.00 |
|
Valve covers red powder coated logo alum. tall |
add $245.00 |
